Wasp Switching Products - Switches

This decimal switch was originally design for military Manpack Radio applications but now used extensively in professional electronics. It is available for PCB mounting with solder pillar terminals. It has a 25 mm square body with the tags in line with the spindle, in 10 12 or 16 positions with 1 to 4 poles. Shorting or non-shorting switching is standard with the usual options of torque, stopped positions and sealing available.

Options:		Full data Left click to view, right click "save target as" to download
SPRING RETURN All of WASP rotary switches have the option of being fitted with a spring return facility. This can be fitted at either end of the operation and allows for a test of secure position. PULL-TO-TURN The Pull-to-Turn addition is available on the DB, DC, and DR range of switches and allows for the design such that one or both end positions can only be entered if the spindle is pulled before turning. This gives a totally secure position that cannot be entered accidentally. This is available as a panel and spindle sealed switch. PUSH-TO-TURN The Push-to-Turn addition is available on the DC, and DR range of switches and can be designed to allow movement into an end position by pushing the spindle before turning. This gives a position that defines a new function e.g. testing and standard sealing is still an option.

Switches

World Class Engineering Solutions

WASP Switching Products
Southmoor Lane
Havant,
Hampshire.
PO9 1JW
Tel: +44 (0)23 9245 3711
Fax: +44 (0)23 9247 3918
sales@wasp-ltd.co.uk

PUSH BUTTON
On all ranges, WASP can provide a Push Button facility that can be operated in each position by pushing the spindle. This design is achieved with a complete panel and spindle seal.
DUAL CONCENTRIC
All the WASP ranges of switches are available with dual concentric spindle, which can be used for a potentiometer or an additional rotary switch. This allows far greater switching capacity for the same panel area and can be supplied with full panel and spindle sealing.